another intake update

so i went and bought a set of UPR fuel rails for the beast, just one more thing closer to marking the intake as a done project, they should be in tomarrow 7/23/08
9/16inch id.

since im going to these rails i decided to go to a steel braided line set up from the tank to the rails, 8-an feed with 6-an return... also going to a fuel cell setup for the race gas. ill be able to switch from pump gas in my stock tank to race gas in the fuel cell. fuel cell will be here on july 28th... then the fabrication will begin

i really am stopping with these side projects after this one, why have a badass motor and big rails if you cant feed it, after this total focus on the motor/trans setup.... i swear